Commit graph

1135 commits

Author SHA1 Message Date
Raheman Vaiya 8e31030390 Add support for OSC color sequences 2021-12-26 18:57:44 +01:00
Hiltjo Posthuma 2f6e597ed8 fix possible rare crash when Xutf8TextPropertyToTextList fails
from the XmbTextListToTextProperty(3) man page:

"If insufficient memory is available for the new value string, the functions
return XNoMemory.  If the current locale is not supported, the functions return
XLocaleNotSupported.  In both of these error cases, the functions do not set
text_prop_return."

Reported by Steffen Nurpmeso <steffen@sdaoden.eu>, thanks!
2021-08-24 13:44:35 +02:00
Koichi Murase 1d3142da96 fix a problem that the standard streams are unexpectedly closed
In the current implementation, the slave PTY (assigned to the variable
`s') is always closed after duplicating it to file descriptors of
standard streams (0, 1, and 2).  However, when the allocated slave PTY
`s' is already one of 0, 1, or 2, this causes unexpected closing of a
standard stream.  The same problem occurs when the file descriptor of
the master PTY (the variable `m') is one of 0, 1, or 2.

In this patch, the original master PTY (m) is closed before it would
be overwritten by duplicated slave PTYs.  The original slave PTY (s)
is closed only when it is not one of the stanrad streams.
2021-08-24 13:30:11 +02:00
Petar Kapriš 2ec571a30c Add 14th bit to XK_SWITCH_MOD bitmask
The bits of uint signal in an XKeyEvent which concern the key group (keyboard
layout) are bits 13 and 14, as documented here:
https://www.x.org/releases/X11R7.7/doc/libX11/XKB/xkblib.html#Groups_and_Shift_Levels
In the older version, only bit 13 was marked as part of XK_SWITCH_MOD, this
causes issues for users who have more than two keymaps. the 14th bit is not
in ignoremod, key sequences are not caught by match(), if they switch to a third
or fourth keyboard.
2021-07-18 11:44:56 +02:00
Markus F.X.J. Oberhumer 4536f46cff Mild const-correctness improvements.
Only touch a few things, the main focus is to
improve code readability.
2021-05-06 18:21:10 +02:00
Hiltjo Posthuma 9e68fdbcdb fix: correctly encode mouse buttons >= 8 in X10 and SGR mode
These are typically mapped in X11 to the side-buttons (backward/forwards) on
the mouse. A comparison of the button numbers in SGR mode (first field):

st old:
0 1 2 64 65 66 67 68 69 70

st new (it is the same as xterm now):
0 1 2 64 65 66 67 128 129 130

A script to test and reproduce it, first argument is "h" (on) or "l" (off):

	#!/bin/sh
	printf '\x1b[?1000%s\x1b[?1006%s' "$1" "$1"

	for n in 1 2 3 4 5 6 7 8 9 10; do
		printf 'button %d\n' "$n"
		xdotool click "$n"
		printf '\n\n'
	done
2021-03-19 11:58:59 +01:00
Hiltjo Posthuma 4ef0cbd8b9 remove unused variable from previous patch 2020-10-18 11:18:03 +02:00
John Collis 28b4c822c5 ST: Add WM_ICON_NAME property support
Also added _NET_WM_ICON_NAME.
2020-10-18 11:17:11 +02:00
Hiltjo Posthuma fa253f077f bump version to 0.8.4 2020-06-19 11:27:17 +02:00
Hiltjo Posthuma b27a383a3a config.mk: use PKG_CONFIG in commented OpenBSD section 2020-06-17 23:49:40 +02:00
Hiltjo Posthuma 81067c65ea LICENSE: bump years 2020-06-17 23:49:40 +02:00
Hiltjo Posthuma f74a9df6e1 remove sixel stub code
Remove stub code that was used for an experiment of adding sixel code to st
from the commit f7398434.
2020-06-17 23:49:22 +02:00
Hiltjo Posthuma 818ec746f4 fix unicode glitch in DCS strings, patch by Tim Allen
Reported on the mailinglist:

"
I discovered recently that if an application running inside st tries to
send a DCS string, subsequent Unicode characters get messed up. For
example, consider the following test-case:

    printf '\303\277\033P\033\\\303\277'

...where:

  - \303\277 is the UTF-8 encoding of U+00FF LATIN SMALL LETTER Y WITH
    DIAERESIS (ÿ).
  - \033P is ESC P, the token that begins a DCS string.
  - \033\\ is ESC \, a token that ends a DCS string.
  - \303\277 is the same ÿ character again.

If I run the above command in a VTE-based terminal, or xterm, or
QTerminal, or pterm (PuTTY), I get the output:

    ÿÿ

...which is to say, the empty DCS string is ignored. However, if I run
that command inside st (as of commit 9ba7ecf), I get:

    ÿÿ

...where those last two characters are \303\277 interpreted as ISO8859-1
characters, instead of UTF-8.

I spent some time tracing through the state machines in st.c, and so far
as I can tell, this is how it works currently:

  - ESC P sets the "ESC_DCS" and "ESC_STR" flags, indicating that
    incoming bytes should be collected into the strescseq buffer, rather
    than being interpreted.
  - ESC \ sets the "ESC_STR_END" flag (when ESC is received), and then
    calls strhandle() (when \ is received) to interpret the collected
    bytes.
  - If the collected bytes begin with 'P' (i.e. if this was a DCS
    string) strhandle() sets the "ESC_DCS" flag again, confusing the
    state machine.

If my understanding is correct, fixing the problem should be as easy as
removing the line that sets ESC_DCS from strhandle():

diff --git a/st.c b/st.c
index ef8abd5..b5b805a 100644
--- a/st.c
+++ b/st.c
@@ -1897,7 +1897,6 @@ strhandle(void)
		xsettitle(strescseq.args[0]);
		return;
	case 'P': /* DCS -- Device Control String */
-		term.mode |= ESC_DCS;
	case '_': /* APC -- Application Program Command */
	case '^': /* PM -- Privacy Message */
		return;

I've tried the above patch and it fixes my problem, but I don't know if
it introduces any others.
"
2020-06-17 21:35:39 +02:00
Hiltjo Posthuma 9ba7ecf7b1 FAQ: fix single-buffer patch
rebase against master
2020-06-01 14:09:46 +02:00
Hiltjo Posthuma a2a704492b config.def.h: add an option allowwindowops, by default off (secure)
Similar to the xterm AllowWindowOps option, this is an option to allow or
disallow certain (non-interactive) operations that can be insecure or
exploited.

NOTE: xsettitle() is not guarded by this because st does not support printing
the window title. Else this could be exploitable (arbitrary code execution).
Similar problems have been found in the past in other terminal emulators.

The sequence for base64-encoded clipboard copy is now guarded because it allows
a sequence written to the terminal to manipulate the clipboard of the running
user non-interactively, for example:

printf '\x1b]52;0;ZWNobyBoaQ0=\a'
2020-05-30 22:06:15 +02:00
Hiltjo Posthuma 0f8b40652b FAQ: add some details about the w3m img hack
... and an example patch to switch from double-buffering to a single buffer.
2020-05-30 22:05:17 +02:00
Hiltjo Posthuma e6e2c6199f tiny style fix 2020-05-30 22:05:17 +02:00
Hiltjo Posthuma 94b8ec0021 Partially add back in "support REP (repeat) escape sequence"
Add the functionality back in for xterm compatibility, but do not expose the
capability in st.info (yet).

Some notes:

It was reverted because it caused some issues with ncurses in some
configurations, namely when using BSD padding (--enable-bsdpad, BSD_TPUTS) in
ncurses it caused issues with repeating digits.

A fix has been upstreamed in ncurses since snapshot 20200523. The fix is also
backported to OpenBSD -current.
2020-05-30 22:04:28 +02:00
Steve Ward dec6b530a4 Call xsetcursor to set win.cursor in main
In xsetcursor, remove "DEFAULT(cursor, 1)" because 0 is a valid value.
Increase max allowed value of cursor from 6 to 7 (st extension).
2020-05-24 13:45:42 +02:00
Hiltjo Posthuma 475a0a36cb Revert "support REP (repeat) escape sequence"
This reverts commit e8392b282c.

There is currently a bug in older ncurses versions (like on OpenBSD) where a
fix for a bug with REP is not backported yet. Most likely in tty/tty_update.c:

Noticed while using lynx (which uses ncurses/curses).
To reproduce using lynx: echo "Z0000000" | lynx -stdin

or using the program:

int
main(void)
{
	WINDOW *win;
	win = initscr();

	printw("Z0000000");

	refresh();

	sleep(5);

	return 0;
}

This prints "ZZZZZZZ" (incorrectly).
2020-05-16 21:06:13 +02:00
Avi Halachmi (:avih) e8392b282c support REP (repeat) escape sequence
The sequence \e[Nb prints the last printed char N (more) times if it's
printable, and it's ignored after newline or other control chars.

This is Ecma-048/ANSI-X3.6 sequence and not DEC VT. It's supported by
xterm, and ncurses uses it when possible, e.g. when TERM is xterm* (and
with this commit also st*).

xterm supports only codepoints<=255, possibly due to internal limits.
We support any value/codepoint which was placed in a cell.

To test:
- tput rep 65 4 -> prints 'AAAA'
- printf "\342\225\246\033[4b" -> prints U+2566 1+4 times.
2020-05-16 14:08:10 +02:00
Roberto E. Vargas f8afebdfa0 Add rin terminfo capability
Tianlin Qu discovered that st is missing rin (scroll back #1 lines).
2020-05-16 14:07:31 +02:00
k0ga bda9c9ffa6 Make shift+wheel behaves as shift+Prev/Next
St uses a very good hack where mouse wheel genereates ^Y and ^E,
that are the same keys that less and vi uses for backward and
fordward scrolling. Scroll, as many terminal emulators, use
shift+Prev/Next for scrolling, but it is also using ^E and ^Y
for scroling, characters that are reserved in the POSIX shell
in emacs mode for end of line and yanking, making scroll unsable
in st.

This patch adds a new hack, making shift+wheel returning the
same sequences than shift+Prev/Next, meaning that scroll or
any other similar program will not be able to differentiate
between them.
2020-05-16 12:37:14 +02:00
Jakub Leszczak 045a0fab4f Fix selection: selscroll 2020-05-12 15:38:17 +02:00
Jakub Leszczak 9c30066e73 Fix selection: ignore ATTR_WRAP when rectangular selection in getsel 2020-05-12 15:38:02 +02:00
Jakub Leszczak 8304d4f059 Fix selection: selclear in tputc 2020-05-12 15:37:59 +02:00
Hiltjo Posthuma 914fb825df code-style: add fallthrough comment
Patch by Steve Ward, thanks.
2020-05-09 14:43:31 +02:00
Hiltjo Posthuma cde480c693 optimize column width calculation and utf-8 encode for ASCII
In particular on OpenBSD and on glibc wcwidth() is quite expensive.
On musl there is little difference.
2020-05-09 14:11:25 +02:00
Hiltjo Posthuma 8211e36d28 fix for incorrect (partial) written sequences when libc wcwidth() == -1
Fix an issue with incorrect (partial) written sequences when libc wcwidth() ==
-1. The sequence is updated to on wcwidth(u) == -1:

	c = "\357\277\275"

but len isn't.

A way to reproduce in practise:

* st -o dump.txt
* In the terminal: printf '\xcd\xb8'
- This is codepoint 888, on OpenBSD it reports wcwidth() == -1.
- Quit the terminal.
- Look in dump.txt (partial written sequence of "UTF_INVALID").

This was introduced in:

"	commit 11625c7166
	Author: czarkoff@gmail.com <czarkoff@gmail.com>
	Date:   Tue Oct 28 12:55:28 2014 +0100

	    Replace character with U+FFFD if wcwidth() is -1

	    Helpful when new Unicode codepoints are not recognized by libc."

Change:

Remove setting the sequence. If this happens to break something, another
solution could be setting len = 3 for the sequence.
2020-05-09 14:07:52 +02:00
Hiltjo Posthuma 87545c612e tiny code-style and typo-fix in comment 2020-05-09 14:05:04 +02:00
Avi Halachmi (:avih) 1d59091065 auto-sync: draw on idle to avoid flicker/tearing
st could easily tear/flicker with animation or other unattended
output. This commit eliminates most of the tear/flicker.

Before this commit, the display timing had two "modes":

- Interactively, st was waiting fixed `1000/xfps` ms after forwarding
  the kb/mouse event to the application and before drawing.

- Unattended, and specifically with animations, the draw frequency was
  throttled to `actionfps`. Animation at a higher rate would throttle
  and likely tear, and at lower rates it was tearing big frames
  (specifically, when one `read` didn't get a full "frame").

The interactive behavior was decent, but it was impossible to get good
unattended-draw behavior even with carefully chosen configuration.

This commit changes the behavior such that it draws on idle instead of
using fixed latency/frequency. This means that it tries to draw only
when it's very likely that the application has completed its output
(or after some duration without idle), so it mostly succeeds to avoid
tear, flicker, and partial drawing.

The config values minlatency/maxlatency replace xfps/actionfps and
define the range which the algorithm is allowed to wait from the
initial draw-trigger until the actual draw. The range enables the
flexibility to choose when to draw - when least likely to flicker.

It also unifies the interactive and unattended behavior and config
values, which makes the code simpler as well - without sacrificing
latency during interactive use, because typically interactively idle
arrives very quickly, so the wait is typically minlatency.

While it only slighly improves interactive behavior, for animations
and other unattended-drawing it improves greatly, as it effectively
adapts to any [animation] output rate without tearing, throttling,
redundant drawing, or unnecessary delays (sounds impossible, but it
works).
2020-05-09 13:53:50 +02:00
Jan Klemkow d6ea0a1a61 replace exit(3) by _exit(2) in signal handler sigchld()
exit(3) is not async-signal-safe but, _exit(2) is.
This change prevents st to crash and dump core.
2020-04-30 01:21:21 +02:00
Hiltjo Posthuma 43a395ae91 bump version to 0.8.3 2020-04-27 13:56:25 +02:00
Ivan Tham 72e3f6c7c0 Update XIM cursor position only if changed
Updating XIM cursor position is expensive, so only update it when cursor
position changed.
2020-04-19 19:39:48 +02:00
Hiltjo Posthuma 33a9a45664 just remove the EOF message 2020-04-11 15:45:06 +02:00
Roberto E. Vargas Caballero 771bc401f7 Add st-mono terminfo entry
This entry is intended for monocolor display and it is very
helpful for color haters.
2020-04-11 15:23:23 +02:00
Hiltjo Posthuma d66bd405c0 config.def.h: add a comment for the scroll variable 2020-04-11 15:23:23 +02:00
Hiltjo Posthuma e997303502 Fix small typos 2020-04-11 15:23:23 +02:00
Quentin Rameau c1145268f6 Launch scroll program with the default shell 2020-04-11 15:23:23 +02:00
Roberto E. Vargas Caballero 0b73612c0d Update FAQ with the last modifications 2020-04-11 15:23:23 +02:00
Roberto E. Vargas Caballero 019449a7e6 Add terminfo entries for backspace mode
St used to use backspace as BS until the commit 230d0c8, but due
to general lack of knowledge of lusers, we moved to the most common
configuration in linux to avoid answering the same question 3 times
per month. With the most common configuration we have a backspace
that returns a DEL, and we have a Delete key that doesn't return a
DEL character neither a BS.

When dealing with devices connected using a serial line (or even
with Plan9) it is more common Backspace as BS and Delete as DEL. For
this reason, st is not always the best tool when you talk with a
serial device.

This patch adds new terminfo entries for Backspace as BS and Delete
as DEL. A patch for confg.h is also added, to make easier switch
between both configurations.
2020-04-11 15:23:23 +02:00
Roberto E. Vargas Caballero fbae700a3f Fix style issue 2020-04-11 15:23:23 +02:00
Roberto E. Vargas Caballero e52319cc7d ttyread: test for EOF while reading tty
When a read operation returns 0 then it means that we arrived to the end of the
file, and new reads will return 0 unless you do some other operation such as
lseek(). This case happens with USB-232 adapters when they are unplugged.
2020-04-11 15:23:23 +02:00
Roberto E. Vargas Caballero 21e0d6e8b8 Add support for scroll(1)
Scroll is a program that stores all the lines of its child and be used in st as
a way of implementing scrollback.

This solution is much better than implementing the scrollback in st itself
because having a different program allows to use it in any other program
without doing modifications to those programs.
2020-04-11 15:23:20 +02:00
Hiltjo Posthuma 5703aa0390 make argv0 not static, fixes a warning with tcc
Reported by Aajonus, thanks!
2020-04-10 12:12:43 +02:00
Avi Halachmi (:avih) 28ad288399 mouseshortcuts: fix custom modifier on release
This line didn't work at mshortcuts at config.h:

  /*  mask       button   function  arg       release */
    { ShiftMask, Button2, selpaste, {.i = 0}, 1 },

and now it does work.

The issue was that XButtonEvent.state is "the logical state ... just prior
to the event", which means that on release the state has the Button2Mask
bit set because button2 was down just before it was released.

The issue didn't manifest with the default shift + middle-click on release
(to override mouse mode) because its specified modifier is XK_ANY_MOD, at
which case match(...) ignores any specific bits and simply returns true.

The issue also doesn't manifest on press, because prior to the event
Button<N> was not down and its mask bit is not set.

Fix by filtering out the mask of the button which we're currently matching.

We could have said "well, that's how button events behave, you should
use ShiftMask|Button2Mask for release", but this both not obvious to
figure out, and specifically here always filtering does not prevent
configuring any useful modifiers combination. So it's a win-win.
2020-04-02 14:41:03 +02:00
Ivan Tham 51e19ea11d Remove explicit XNFocusWindow
XCreateIC ICValues default XNFocusWindow to XNClientWindow if not
specified, it can be omitted since it is the same.

From the documentation
https://www.x.org/releases/current/doc/libX11/libX11/libX11.html

> Focus Window
>
> The XNFocusWindow argument specifies the focus window. The primary
> purpose of the XNFocusWindow is to identify the window that will receive
> the key event when input is composed.
>
> When this XIC value is left unspecified, the input method will use the
> client window as the default focus window.
2020-02-19 00:46:20 +01:00
Quentin Rameau 26cdfebf31 x: fix XIM handling
Do not try to set specific IM method, let the user specify it with
XMODIFIERS.

If the requested method is not available or opening fails, fallback to
the default input handler and register a handler on the new IM server
availability signal.

Do the same when the input server is closed and (re)started.
2020-02-02 22:56:51 +01:00
Quentin Rameau cd785755f2 x: check we still have an XIC context before accessing it 2020-02-02 22:56:51 +01:00
Quentin Rameau 2cb539142b x: do not instantiate a new nested list on each cursor move 2020-02-02 22:56:51 +01:00