This avoids 'exit(1)' with errors outside of compilation
(nasty in particular with libtcc usage)
As a sideeffect multiple errors can be seen for linker
errors (such as undefined symbols, relocation errors, ...)
Allows to create dynamic executables, using the code path
for TCC_OUTPUT_DLL but add an .interp header (plus a FLAGS_1
entry in the dynamic section to make 'readelf' say "PIE")
Introduces TCC_OUTPUT_DYN as alias for TCC_OUTPUT_DLL.
There is no runtime option, only one to configure:
./configure --config-pie
100 insertions(+), 76 deletions(-)
Better avoid global variables, at least in new code.
tccdbg.c hopefully should be logically identical to the
former parts in tccgen/elf.c (s1 tccstate added in some
places)
tccelf.c: dwarf linkage seems special per dwarf rather
than special per target.
The new gcc12 release does not support stabs any more.
This was a good reason to add support for dwarf.
The stabs code still works and is used if configure option --dwarf
is not used.
Tested on x86_64, i386, arm, arm64, riscv64 with dwarf-5.
Some debuggers may not support dwarf-5. Try using older dwarf versions
i that case.
The tccmacho.c code probably need some support for dwarf.
arm-gen.c, arm64-gen.c, i386-gen.c, riscv64-gen.c, x86_64-gen.
- fix get_sym_ref symbol size
arm-link.c, arm64-link.c, i386-link.c, riscv64-link.c, x86_64-link.c
- add R_DATA_32U
libtcc.c:
- parse -gdwarf option
tcc.c:
- add dwarf option
tcc.h:
- add dwarf option and sections
tccelf.c:
- init dwarf sections
- avoid adding sh_addr for dwarf sections
- remove dwarf relocs for output dll
- add dwarf sections for tccrun
tccgen.c:
- add dwarf defines + global data
- add dwarf_* functions
- mix dwarf code with stabs code
- a trick is used to emit function name in .debug_line section so
only this section has to be parsed instead of .debug_info and
.debug_abbrev.
- fix init debug_modes
tccrun.c:
- add dwarf sections in rt_context
- init them in tcc_run
- add new dwarf code rt_printline_dwarf to find file/function
dwarf.h:
- New file
tcc-doc.texi:
- document dwarf
configure:
- add dwarf option
lib/Makefile
- change -gstabs into -gdwarf
lib/bt-exe.c, tests/tests2/Makefile, tests/tests2/126_bound_global:
- Add __bound_init call
- Add new testcase to test it
Currently tcc does not use lazy binding. It puts all relocations in the RELX
section and solve them all at startup.
This was not working on bsd.
tcc.h:
- New RELPLT_SECTION_FMT for plt relocations
- New entry relocplt in struct Section
tccelf.c:
- put_elf_reloca: put R_JMP_SLOT in relocplt section
- build_got_entries*: Use two passes because R_JMP_SLOT and R_GLOB_DAT
can not be intermixed on some targets (arm, arm64)
- layout_sections: Calculate correct size relocplt section for DT_ values.
Make sure relocplt is last
- fill_dynamic: Add DT_ values when got is filled
move DT_VERSYM because dynamic linker cannot handle it standone
- Add note section for NetBSD
arm-link.c/arm64-link.c/i386-link.c/riscv64-link.c/x86_64-link.c:
- fill got table with pointer to plt section or symbol value in case
of TCC_OUTPUT_MEMORY
arm-link.c/arm64-link.c:
- fix offset first plt entry
i386-link.c/x86_64-link.c:
- use correct reloc entry
- use relofs - sizeof (ElfW_Rel) because the reloc is already done
lib/bcheck.c:
- no __libc_freeres on FreeBSD and NetBSD
tests/Makefile:
- Add -fno-stack-protector for OpenBSD
tests/tests2/Makefile:
- disable 106_pthread/114_bound_signal
tcc_enter/exit_state() are meant exclusively to protect
the tcc_compile() and its sub-functions in tccpp.c,
tccgen.c, tccasm.c and xxx-gen.c.
Other files that are part of libtcc simply must not use global
variables.
- riscv64/last_hi: move to TCCState
from 72250bece2
- tccrun.c: Using a fixed address would not work anyway
("tcc -run tcc.c -run ..." for example)
from baacb0f52a
- tests/Makefile: support for a platform doesn't make sense if
it doesn't pass our basic tests.
from 591feda103
Also:
- tccgen: cleanup "duplicate member" (only 2 passes,
avoids additional TokenSym field)
from 170be79a42
- tccpe.c: commit "tidy support for helper function" created
STT_NOTYPE symbols and hence relied on ad-hoc detection which
didn't work for x86_64 (as reported by Christian Jullien)
- tccgen.c: However to be more safe the helper symbols are
now made STT_FUNC anyway (via new VT_ASM_FUNC).
Also:
- tcc.h: minor reorder
- riscv64-*, arm64-*, tccmacho.c: avoid some gcc format-warnings
(mingw-gcc complains about "%llx" being "unknown conversion",
although it does work since Vista or so)
Checked on:
- i386/x86_64 (linux/windows)
- arm/arm64 (rapberry pi)
- riscv64 (simulator)
Not tested for arm softfloat because raspberry pi does not support it.
Modifications:
Makefile:
add arm-asm.c to arm64_FILES
add riscv64-asm.c (new file) to riscv64_FILES
lib/Makefile:
add fetch_and_add_arm.o(new file) to ARM_O
add fetch_and_add_arm64.o(new file) to ARM64_O
add fetch_and_add_riscv64.o(new file) to RISCV64_O
add $(BCHECK_O) to OBJ-arm/OBJ-arm64/OBJ-riscv64
tcc.h:
Enable CONFIG_TCC_BCHECK for arm32/arm64/riscv64
Add arm-asm.c, riscv64-asm.c
tcctok.h:
for arm use memmove4 instead of memcpy4
for arm use memmove8 instead of memcpy8
tccgen.c:
put_extern_sym2: for arm check memcpy/memmove/memset/memmove4/memmove8
only use alloca for i386/x86_64
for arm use memmove4 instead of memcpy4
for arm use memmove8 instead of memcpy8
fix builtin_frame_address/builtin_return_address for arm/riscv64
tccrun.c:
Add riscv64 support
fix rt_getcontext/rt_get_caller_pc for arm
tccelf.c:
tcc_load_dll: Print filename for bad architecture
libtcc.c:
add arm-asm.c/riscv64-asm.c
tcc-doc.texi:
Add arm, arm64, riscv64 support for bound checking
lib/bcheck.c:
add __bound___aeabi_memcpy/__bound___aeabi_memmove
__bound___aeabi_memmove4/__bound___aeabi_memmove8
__bound___aeabi_memset for arm
call fetch_and_add_arm/fetch_and_add_arm64/fetch_and_add_riscv64
__bound_init: Fix type for start/end/ad
__bound_malloc/__bound_memalign/__bound_realloc/__bound_calloc: Use size + 1
arm-gen.c:
add bound checking code like i386/x86_64
assign_regs: only malloc if nb_args != 0
gen_opi/gen_opf: Fix reload problems
arm-link.c:
relocate_plt: Fix address calculating
arm64-gen.c:
add bound checking code like i386/x86_64
load/store: remove VT_BOUNDED from sv->r
arm64_hfa_aux/arm64_hfa_aux: Fix array code
gfunc_prolog: only malloc if n != 0
arm64-link.c:
code_reloc/gotplt_entry_type/relocate: add R_AARCH64_LDST64_ABS_LO12_NC
relocate: Use addXXle instead of writeXXle
riscv64-gen.c:
add bound checking code like i386/x86_64
add NB_ASM_REGS/CONFIG_TCC_ASM
riscv64-link.c:
relocate: Use addXXle instead of writeXXle
i386-gen.c/x86_64-gen.c
gen_bounds_epilog: Fix code (unrelated)
tests/Makefile:
add $(BTESTS) for arm/arm64/riscv64
tests/tests2/Makefile:
Use 85 only on i386/x86_64 because of asm code
Use 113 only on i386/x86_64 because of DLL code
Add 112/114/115/116 for arm/arm64/riscv64
Fix FILTER (failed on riscv64)
tests/boundtest.c:
Only use alloca for i386/x86_64
This allows creation of TCCStates and operation with API
calls independently from each other, even from threads.
Frontend (option parsing/libtcc.c) and backend (linker/tccelf.c)
now depend only on the TCCState (s1) argument.
Compilation per se (tccpp.c, tccgen.c) is still using
globals for convenience. There is only one entry point
to this section which is tcc_compile() which is protected
by a semaphore.
There are some hacks involved to avoid too many changes,
as well as some changes in order to avoid too many hacks ;)
The test libtcc_test_mt.c shows the feature. Except this
new file the patch adds 87 lines overall.
relocs against defined symbols are replaced by relative
relocs, when a GOT slot is created. But code relocs (usually
calls via PLT) use the plt_offset member of attr, not the got_offset
member, so the "huh" warning was triggered in the case of calls to
static functions (the code still worked).
So, for now just use the AUTO_GOT_PLT mechanism. We could also
emit a non-PLT reloc in the backend for calls to VT_STATIC functions
(like the x86-64 backend does) and do the same as for x86-64 in
build_got_entries (which transforms PLT32 into PC32 relocs, riscv
would transform CALL_PLT into CALL relocs). Maybe later.
* support loading sym addresses from GOT: important for weak syms,
fixes 104_inline. This is still incomplete, it only works
for taking the sym address, not for directly loading/storing into
such symbols (i.e. not for VT_LVAL)
* another op: '%'
* ELF flags: add EF_RISCV_FLOAT_ABI_DOUBLE, which is our ABI.
* implement compares, gtst and gsym/gjmp and add
* implement stores (simple cases)
* fix arg passing with more than one register arg, fix
loads to not always use 8byte loads
* add some predefined macros: __riscv, __riscv_xlen,
__SIZEOF_POINTER__ (needed by glibc header)
The first 5 tests of tests2 run now.
this is enough to let me link a tcctest.c compiled by GCC
using some current debian sid riscv64 system. It needs
linking against libgcc.a for various floating point TFmode
routines. The result runs.
herman ten brugge